Datasat RS20i Specifications Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
RS20i Installation and Operating Guide Page 106
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
4.4 Network
Setup (System) > Network
Figure 80. Network Screen
The Network screen displays the current network mode and IP address. It also displays whether or not
the network connection is currently up or down. Use it to change between dynamic and static IP
addressing.
In static IP mode, you can enter values for the IP address, Netmask, and Gateway.
To change or enter a value, touch the white box under the appropriate label.
The DNS Server, NTP server and log file server can be entered whether using DHCP or
Static modes.
4.4.1 SNMP
Setup (System) > Network > SNMP
Figure 81. SNMP Setup Screen
Agent Mode: If set to disabled, the SNMP is turned off. When enabled the SNMP agent mode may be
set to v1 (SNMPv1) or v2 (SNMPv2) to match the SNMP server requirement.
Manager IP Address: Set this to the IP address to send SNMP trap messages.
roCommunity: This is the access code for SNMP read messages.
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 139 140

Comments to this Manuals

No comments