Datasat RS20i Specifications download pdf (Page 110)

RS20i Installation and Operating Guide Page 110

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

 Use the Dest: box on the Ping Test to check the ‘gateway’ is ‘OK’.

 If there is PC connected to the same LAN, open an internet browser and go to any public web

site such as http://www.datasatdigital.com

4. Planning a Simple Netwo

rk for Digital Cinema

All the network devices connected on a single network will have the same zone address and each

device will have its own network address.

Use a standard private network, for example 192.168.0.X (X can be in the range 1 – 254)

Most networks have a Gateway (sometimes called a router) which connects to other networks, eg to

the internet via the modem provided by the ISP. This is normally numbered either 1 or 254

Gateway = 192.168.0.1

The mask (also called the netmask) specifies the size of the network. For simple networks this is:

Mask = 255.255.255.0

There is a single address for devices to communicate with all other devices on the LAN at once.

This is the Broadcast Address. For simple networks, the first 3 number groups are the same as the IP

addresses and the 4th group is 255

Broadcast Addr = 192.168.0.255

Next assign a network address for each device in a logical and memorable way, for example:

Screen 1 RS20i 192.168.0.10

D-Cinema server 192.168.0.11

Digital Projector 192.168.0.12

Another network device 192.168.0.13

Control PC 192.168.0.14

Screen 2 RS20i 192.168.0.20

D-Cinema server 192.168.0.21

Digital Projector 192.168.0.22

Another network device 192.168.0.23

Control PC 192.168.0.24

Technical area Library server 192.168.0.200

Satellite server 192.168.0.201

Another server 192.168.0.202

Administrators PC 192.168.0.203

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 139 140

No comments

Datasat RS20i Specifications Page 110