Datasat RS20i Specifications download pdf (Page 108)

RS20i Installation and Operating Guide Page 108

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

2. Check for a Connection to the Local Area Network (LAN)

Find another network device on the same LAN. This could be a D-Cinema server, digital projector

or laptop. The IP address of these devices must be in the same subnet; so the first 3 groups of

numbers will be the same and the 4th (last) number group must be different.

E.g. all devices on the same LAN will have 192.168.0.XX addresses (The XX will be different for

each device).

Go to Setup (System)…Network….Net Diag and enter the IP address of the other network device in

the <Select address> box. Press Ping Test and see the message. ‘OK’ means the RS20i is connected

to the same network.

‘Fail’ means that the network connection to the other device is not correct.

 Check that the network cables are plugged into the equipment (RS20i, Projector, Server etc).

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 139 140

No comments

Datasat RS20i Specifications Page 108