Datasat RS20i Specifications download pdf (Page 31)

RS20i Installation and Operating Guide Page 31

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

2.5.2 Rack Mount Installation

 The RS20i requires 3U of standard rack space for proper mounting.

Note: The RS20i ships with feet installed. These may need to be removed for rack space

clearance

 Install the rack ears onto the RS20i by removing three 8-32 pan head screws on each side of

the RS20i and using them to attach the rack ears.

Figure 12. Rack Ear Installation

 Mount the RS20i into the rack securing it properly with 4 rack screws. 10-32 Rack screws and

washer

s are provided in the packing kit.

2.5.3 Installing/Removing Feet

The RS20i is shipped with feet already installed, for placing on a desktop or shelf. When rack mounting,

the feet may need to be removed for clearance. To remove the feet, simply twist by hand to unscrew.

To replace feet, screw them onto the bottom of the RS20i and hand tighten.

Warning: Only use the feet provided with the RS20i, which have the correct screw length to

prevent internal damage to the RS20i circuitry.

Figure 13. RS20i Feet

Remove (3) pan

head screws to

mount rack ear

Rack ear

installed

Foot (4 places)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 139 140

No comments

Datasat RS20i Specifications Page 31