Datasat RS20i Specifications download pdf (Page 14)

RS20i Installation and Operating Guide Page 14

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

1.0 Operating RS20i

1.1 How-To Procedures – Operations

ACTIVITY INSTRUCTIONS

Turn Power ON Press and release the power button on the front panel. If the unit will not

power up, be sure that the rear panel power switch is ON and the unit is

plugged into a working AC outlet protected by a surge protector. See

Powering ON the RS20i Processor, page 16

Turn Power OFF Press and hold the power button on the front panel for about 2 seconds.

Adjust volume Turn the master volume control knob on the front panel to adjust volume

on all channels. Turn clockwise to increase volume. See Adjusting the

Volume control, page 19.

Select an input Touch the desired input in the bottom row of the RS20i display. If you do

not see the input you want, see if the right most button says “More”. If

so, tap the More button for more choices. If the desired input is still not

shown, the RS20i has not been setup for this input.

See The Home Screen, pa

ge 18.

Identify the selected

input

The current input is highlighted in the bottom row of the RS20i display.

More detail related to this input is shown at the top of the display.

Mute the RS20i Touch the MUTE button. If successful, the MUTE button will change

color to red. See Adjusting the Volume control, page 19.

Unmute the RS20i Touch the red MUTE button. If successful, the button will change color

to white.

Identify muted mode When the RS20i is muted, the MUTE button text will turn red.

View monitor settings Touch the MONITOR button. The Monitor window will display. It will

automatically disappear after 30 seconds. See External monitor Volume,

page 19.

Select monitor

channel(s)

Touch the MONITOR button. The Monitor window will display. Then

touch the MIX button and select the channel(s) you want to hear in the

monitor. When finished, touch the CLOSE button. See External monitor

Volume, page 19.

Change monitor volume Touch the MONITOR button. The Monitor window will display. Then

touch the + or – button until the desired volume is set. The window will

automatically disappear after 30 seconds. See External monitor Volume,

pag

Mute the monitor Touch the MONITOR button. The Monitor window will display. Then

touch the MUTE button in the monitor window. The MUTE button text

will turn red. Note that the Monitor button text, to the right of the window,

also turns red to indicate a muted state. The window will automatically

disappear after 30 seconds.

Unmute the monitor Touch the MONITOR button. The Monitor window will display. Then

touch the MUTE button in the monitor window. The MUTE button red

text will change to white. Note that the Monitor button text, to the right of

the window, also turns white to indicate the unmuted state. The window

will automatically disappear after 30 seconds

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 139 140

Comments to this Manuals

No comments

Datasat RS20i Specifications Page 14

Comments to this Manuals