Datasat RS20i Specifications download pdf (Page 138)

RS20i Installation and Operating Guide Version 1.01

Appendix D: RS20i Product Specifications D-2 Document #: 9301H52900 Ver. 1.01

 Connectors: Two DB25 Male (Ch1-8 and Ch9-16)

 Digital Format: AES/EBU

 Sample Rates: 48kHz, 96kHz and 192kHz

Analog Audio Outputs

 Channels: 16 (fully routable as to input), common mapping with Digital Outputs

 Balanced (can be connected unbalanced or single ended)

 Connectors: Two DB25 Male (Ch1-8 and Ch9-16)

 Level: 300mV with Volume at -15.0, +26dBu max (balanced)

 Connector: 1 single ended RCA output, channel-selectable to drive an external monitor.

Adjustable Levels, to 300mV RMS

 Connector: 1 single ended RCA output, summed output for the hearing impaired. -

Fixed Level Out, 300mV RMS

Audio EQ

Dirac Live® Room Optimization

 12-Channel Dirac Live® room optimization (16-channel Dirac to be available in future

release)

 Dirac Live® Installer kit sold separately

3rd Octave EQ

 16 channels - 31 user-adjustable bandpass filters

 Gain +/-6dB adjustable in 0.5dB steps

 Frequencies range from 20Hz to 20kHz.

Parametric

 16 channels with 3 user-adjustable parametric filters for shaping Subwoofer response.

 Adjustable from 20 to 200Hz, gain +/-6dB in 0.1dB steps

 Q range from 0.7 to 5.

Hi/Low/Bandpass Active Crossovers

 Adjustable from 20Hz to 20kHz; adjustable slope of 6, 12, 18 or 24dB per octave (12

and 24dB filters are Linkwitz-Riley crossover)

Bass/Treble tone control

 Adjustable +/-6dB per channel

 Corner frequency for bass adjustable from 50Hz to 300Hz

 Corner frequency for treble adjustable from 1.5kHz to 12.0kHz

Bass Management

 Full or adjustable high pass settings for screen and surround speakers

 Adjustable high pass filter for sub woofers

 Support for 0 to 4 sub woofers

 Optional phantom center

1 2 ... 133 134 135 136 137 138 139 140

No comments

Datasat RS20i Specifications Page 138