Datasat RS20i Specifications Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 140
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
RS20i Installation and Operating Guide Page 78
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
S/PDIF
TosLink A
TosLink B
Digital 1, 2
Digital 9, 10
DTS Neo: 6. Neo:6 transforms 2-channel PCM input to fit a 5.1 or 6.1 speaker configuration. To use
Neo:6 it must be enabled. After it is enabled, it operates only when receiving a 2-channel unencoded
PCM bitstream
DTS decoders. DTS coherent acoustics decoding is implemented for the HDMI, S/PDIF and TOSLINK
inputs. These inputs will autodetect the DTS bitstream and decode to fit the selected 5.1 or 7.1 speaker
configuration.
DTS-HDMA. DTS-HDMA decoding is implemented for the HDMI input. The HDMI input will auto-
detect the DTS-HDMA bitstream and decode to fit the selected 5.1 or 7.1 speaker configuration.
Dolby Digital. A Dolby audio stream is accepted on HDMI, S/PDIF and TOSLINK inputs.
Operation
The RS20i monitors the selected input signal to determine the type of audio signal received. If a DTS,
DTS-HD or Dolby Digital bitstream is detected, the RS20i decodes the audio and places it on the first 8
channels (see Table 13).
If an un-encoded digital signal is received (i.e. 2-channel PCM), the signal is routed to the first two
channels in th
e RS20i (Left and Right) a
nd the others remain muted. The HDMI also supports 6 or 8
channel un-encoded PCM signal. The RS20i will switch between stream types as the signal type
changes. This occurs automatically within the RS20i.
Table 13: Decoder Channel Assignments
CHANNEL NUMBER CHANNEL NAME
1 Left
2 Right
3 Center
4 Sub Woofer
5 Left Surround
6 Right Surround
7
8
Rear Surround (only with 6.1 playback)
Decoder Setup Options
Additional Decoder options are available to set the speaker configuration. These options are accessed
through the Decoder Setup screen (Note: You must first select an input with Digital 1-2, Digital 9-10,
HDMI, TosLink or S/PDIF as the source).
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 139 140

Comments to this Manuals

No comments