Datasat RS20i Specifications download pdf (Page 32)

RS20i Installation and Operating Guide Page 32

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

2.5.4 Power Supply

Warning: Before powering on the RS20i for the first time, verify that the correct input voltage

has been selected at the rear panel power entry module. Incorrect input voltage setting will

damage the RS20i.

The RS20i may be set for either 115V (105-130V operation) or 230V (215-260V operation).

Figure 14. Power Entry Module – Voltage Input Settings

2.5.4.1 Changing the Input Voltage Setting and Fuses

CAUTION: DOUBLE POLE/NEUTRAL FUSING

Open the fuse compartment door. A small flat blade screwdriver may be used to release the door.

Protect the RS20i metal finish, from damage by the screwdriver, with a rag or other soft item.

Figure 15. Power Entry Module – Releasing the Fuse Compartment Door

Remove the fuse block by freeing it with a small flat blade screwdriver. The block has slots for

this purpose in the top and bottom sides. Do not try to pry the block out from the sides, as this

will damage the block. Use a rag or other soft item to protect the RS20i metal finish.

Soft rag

Screwdriver

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 139 140

No comments

Datasat RS20i Specifications Page 32