Datasat RS20i Specifications download pdf (Page 47)

RS20i Installation and Operating Guide Page 47

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

2.11 Subwoofer EQ – Parametric EQ

The RS20i features Parametric EQ on every channel. Parametric EQ is an optional adjustment and is in

addition to 1/3 Octave EQ. It is only available with low frequencies and offers more control than 1/3

Octave EQ. The Parametric EQ screen looks similar to the 1/3 Octave EQ screen but displays a

frequency range from 20 to 200Hz only. The screen has the same selections (Channel select, etc.) but

also has controls for three filters.

Setup (System) > Inputs > Audio EQ Setup > Parametric Equalization

The three filters can be configured regarding Q and Frequency, and are either enabled or disabled.

 To select a filter, highlight the Filter button and rotate the adjustment knob to select from

the three filters.

 To adjust Q, Freq, or to enable/disable, select the control and rotate the adjustment knob.

Filter disabled in effect turns off Parametric EQ.

Figure 27. Parametric EQ Screen, Filter Enabled

2.12 Copy EQ Set to Another EQ Set

This screen is used to copy the EQ settings for all channels to a new EQ set under a new name. After

equalizing all the channels, copy these settings to create another EQ (with a new name).

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 139 140

No comments

Datasat RS20i Specifications Page 47