Datasat RS20i Specifications download pdf (Page 74)

RS20i Installation and Operating Guide Page 74

RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01

Adjust the input levels of Stereo1 and Stereo2 by selecting the box under L or R and turning

the volume control knob.

Inputs can be sent to:

 The Left and Right outputs

 The Left Surround and Right Surround outputs

 Left and Left Surround, plus Right and Right Surround

 Matrix Decoder

Note when Enable Mic is selected both Microphone and stereo will be on at the same time.

Microphone audio is not mixed with the stereo audio but must be routed to different speakers.

The microphone audio is added to the hearing impaired audio when using the stereo input with

the microphone playing on the surround channels.

4.3.6.3.1. Stereo Mic Level and Routing

System > Inputs > Input Options > Stereo Level and Routing > Mic

Figure 51. Mic Level with Stereo

If Enable Mic is selected in the Stereo level and routing screen, you can adjust mic level and

routing by going to Mic Level and Routing screen.

Note this is used with the Stereo input and Microphone option, if using just the

Microphone input see section 4.3.6.4

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 139 140

No comments

Datasat RS20i Specifications Page 74