Datasat RS20i Specifications Page 96
- Page / 140
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
RS20i Installation and Operating Guide Page 96
RS20i Installation & Operating Guide Document # 9301H52900 Ver. 1.01
The figure below illustrates the LFE input being mixed with the left channel. Each channel works in a
similar fashion so the LFE channel can be inserted into as many speakers as desired.
Figure 76. LFE Mixed with Left Channel
Center Channel: Low Pass to Left/Right Option
An option available for the center channel allows you to cross the center speakers with the left and right
speakers. When this is used the low frequencies for the center channel are evenly divided between the
left and right speakers leaving the mid to high range on the center speaker.
Phantom Center Option
The Phantom Center option allows you to direct the center channel to the left and right speakers if there
is no Center speaker. There is an offset configuration used to increase or decrease the center channel
level. Note that 0dB offset is the default and includes the 3dB signal level attenuation needed to account
for the sound being sent to 2 speakers.
The phantom center option and offset is set in the Center channel configuration screen.
Phantom Surround Option
The Phantom Surround option allows you to direct the surround channels to the front speakers. This is
used for an installation without the surround channels. The left surround channel will be mixed into the
left front channel and the right surround channel will be mixed with the right front channel.
The phantom surround option is set in the left or right surround channel configuration screen.
4.3.8.6.1. Bass Management Setup Procedure
1. Enable bass manage
ment on the Bass Manage
ment Setup screen. This is the master enable that
turns on all Bass Management functions.
2. Select the subwoofer configuration with the appropriate number and position of the subwoofers
used. The channel assignments for the selected subwoofer configuration are listed on the screen
when selecting one or more subwoofers.
3. Skip to step 10 to setup bass management for a configuration with no subwoofers.
- RS20i Audio Processor 1
- Installation and 1
- Operating Guide 1
- Notices 2
- Copyright 2
- Record of Changes 3
- Regulatory Notices 3
- TABLEOFCONTENTS 4
- 3. APPENDICES 6
- Introduction 7
- About RS20i Audio Processor 8
- Limited Warranty 8
- FACTORY WARRANTY INFORMATION 9
- Software License Agreement 9
- Unpacking 11
- Caution Notices 12
- Part 1: Operation 13
- 1.0 Operating RS20i 14
- 2Update 15
- 258 for more details 15
- Navigating through the Menus 17
- 1.4 The Home Screen 18
- 1.4.3 Manual Automation 21
- PROBLEM SOLUTION 22
- 1.5.1 Over Temperature Alert 23
- 2.0 Installation and Set Up 26
- 2.3 Installation Overview 28
- 2.5 Mounting and Connection 30
- 2.5.4 Power Supply 32
- 2.6 Navigating the Menus 33
- 2.7 About Inputs 34
- Output preset: 35
- 2.8 Factory Presets 36
- 2.8.2 Default EQ 37
- 2.8.3 Default Output Presets 37
- 2.9.1 Equipment Requirements 38
- 2.10.2 Set the EQ 44
- 2.13 Final Adjustments 48
- 2.14 Copy Input 48
- 4.0 Setup Menus 51
- 4.1 The Setup Button 56
- 4.2 System Setup Screen 56
- 4.2.3 Access Control 60
- Figure 36. “Expert” Nav Mode 62
- 4.2.4 View Log File 63
- 4.2.5 System Info 63
- 4.2.7 System Monitor 64
- 4.3 Inputs 65
- 4.3.2 Startup Input 66
- 4.3.3 Edit Inputs 66
- 4.3.4 Assign Input Buttons 67
- 4.3.5 Input Source 69
- 4.3.6 Input Options 71
- Operation 78
- Decoder Setup Options 78
- 4.3.7 EQ Setup 79
- Figure 62. Copy EQ Settings 84
- 4.3.8 Output Preset 86
- 4.3.9 Audio Levels 104
- 4.4 Network 106
- 4.5 Automation 111
- 4.5.1 Events 112
- 4.5.2 Macros 117
- 4.5.3 Automation Buttons 118
- 4.5.4 Automation Test Screen 119
- 5.1 Routine Maintenance 120
- 5.2 Troubleshooting 120
- Touch Screen Calibration 121
- 5.3 Error Messages 122
- Figure 98. Downloading Error 123
- HDMI 1.4a Dolby/DTS Decoder 136
- Digital Audio Decoders 137
- Signal Inputs 137
- Signal Outputs 137
- Audio EQ 138
- Audio Delays 139
- Automation Inputs/Outputs 139
- Management 139
- Power Requirements 139
- Hardware Dimensions 139
- Regulatory Compliance 140
- E&OE 140
© 2020, manymanuals.com. All rights reserved. | 2.167 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals